Huidu U60 Single/Dual-Launi USB LED Control Card LED Nuni Panel don Talla
Jadawalin Haɗi
Jerin Ayyuka
Aiki abu | Bayanin aiki |
Ikon sarrafawa | Launi ɗaya:512*32,Max Nisa: 1024 Max tsayi:32 |
Ƙarfin FLASH | 2M Byte (Amfani mai amfani 1.4MB) |
Sadarwa | U-Disk |
Yawan Shirin | Matsakaicin 1000pcs Shirye-shiryen.Taimakawa wasa ta sashin lokaci ko sarrafawa ta maɓalli. |
Yawan Yanki | Yankuna 20 tare da yanki daban, da raba tasirin musamman da iyaka |
Nuna Nuni | Rubutu, Rubutun mai rai, 3DText, Animation (Hoto, SWF), Excel, Lokaci,Yanayin zafi (danshi), kiyaye lokaci, ƙidaya, kalanda na Lunar |
Nunawa | Nuni na jeri, maɓallin maɓalli, ikon nesa |
Aikin agogo | 1, Taimakawa agogon Dijital / agogon bugun kira / Lokacin Lunar / 2. Kidaya/Kidaya, Maballin Ƙidaya/Kidaya sama 3. The font, size, launi da matsayi za a iya saita da yardar kaina 4. Taimakawa yankunan lokaci da yawa |
Kayayyakin Ƙarfafawa | Zazzabi, Humidity, IR Remoter, Photosensitive firikwensin, da dai sauransu. |
Allon sauyawa ta atomatik | Goyon bayan na'urar sauya mai ƙidayar lokaci |
Dimming | Goyi bayan yanayin daidaita haske uku |
Ma'anar tashar jiragen ruwa
Girma
naúrar: mm haƙuri: ± 0.3mm
Bayanin Interface
Serial lamba | Suna | Bayani |
1 | Shigar da wutar lantarki | Haɗa zuwa wutar lantarki na 5V DC |
2 | tashoshin USB | An sabunta shirin ta U-disk |
3 | S1 | danna don canza yanayin gwajin allo |
4 | HUB tashar jiragen ruwa | 2 HUB12, 1 HUB08 yana haɗawa da nuni |
5 | P11 | Haɗa IR, ta hanyar ramut. |
6 | P5 | Haɗin zafin jiki/danshi |
7 | Na waje faifan maɓalli Interface | S2: Haɗa maɓallin maɓalli, canzawa zuwa shirin na gaba, mai ƙidayar lokaci ya fara, ƙirga da S3: Haɗa maɓallin maɓalli, canza shirin da ya gabata, sake saitin lokacin, ƙirgawa S4: Haɗa maɓallin maɓalli, sarrafa shirin, dakatarwar lokaci, sake saitin ƙidayar |
8 | P7 | Haɗa Sensor Haske |
Ma'auni na asali
Tsawon Lokaci | Matsakaicin Ƙimar |
Wutar lantarki (V) | DC 4.2V-5.5V |
Yanayin aiki (℃) | -40 ℃ ~ 80 ℃ |
Yanayin aiki (RH) | 0 ~ 95% RH |
Adana zafin jiki (℃) | -40 ℃ ~ 105 ℃ |
Rigakafin:
1) Don tabbatar da cewa an adana katin sarrafawa yayin aiki na al'ada, tabbatar da cewa baturin da ke kan katin ba ya kwance;
2) Don tabbatar da aikin kwanciyar hankali na dogon lokaci na tsarin;da fatan za a gwada amfani da daidaitaccen ƙarfin wutar lantarki na 5V.