Youyi YY-D-200-5-PFC-K Series 5V 40A 100~240V LED Power Supply
Ƙimar Lantarki
Halayen Shigar Wutar Lantarki
| Aikin | Jerin YY-D-200-5K |
| Ikon fitarwa na al'ada | 200W |
| Wurin lantarki na al'ada | 100Vac ~ 240Vac |
| Wurin shigar da wutar lantarki | Farashin 88 ~ 264 |
| Kewayon mita | 47HZ~63HZ |
| PF | ≥0.95 |
| Leakage Yanzu | ≤0.25ma,@220Vac |
| Matsakaicin shigar AC halin yanzu | 3A |
| Buga halin yanzu | Cold boot 45A (Gwaji a 50% Ipeak: twidth = 600us) / 230VAC |
| inganci (cikakken kaya) | 90% (@220V) |
Fitar Halayen Lantarki
Ƙimar ƙimar zafin aiki Curve
Idan samfurin ya dade yana aiki a yanayin - 40 ℃, da fatan za a nuna buƙatar ku ta musamman.
Fitar halin yanzu da lanƙwan ƙarfin lantarki
Fitar da Wutar Lantarki Da Ka'idodin Yanzu
| Aikin | Jerin YY-D-200-5K |
| Fitar Wutar Lantarki | 5.0V |
| Saitin Daidaito (Babu kaya) | ± 0.1V |
| Fitowar Fitar Yanzu | 30A (INPUT: 100Vac -175.;40A (INPUT: 176Vac -240Vac)
|
| Kololuwar Yanzu | 32A (INPUT: 100Vac -175Vac) ; 41A (INPUT: 176Vac -240Vac) |
| Ka'ida | ± 3% |
Ƙarfin Lokacin Jinkiri
| Lokacin Jinkiri | 220Vac Input @ -40～-5℃ | 220Vac Input @ ≥25℃ |
| Fitar da Wutar Lantarki: 5.0Vdc | ≤5S | ≤3S |
| Fitar da Wutar Lantarki: 5.0Vdc | ≤6S | ≤3S |
Fitowa M Martani
| Fitar Wutar Lantarki | Canza Ƙimar | Wutar lantarki | Load Canjin |
| 5.0 Vdc | 1.5A/US | ≤±5% | @Min.zuwa 50% lodi da 50% zuwa max load |
| 5.0Vdc | 0.5-1A/US | ≥± 3% |
Lokacin Ƙarfin Wutar Lantarki na DC
| Fitar Wutar Lantarki | 220Vac shigarwa & cikakken kaya | Lura |
| 5.0 Vdc | ≤50mS | Lokacin tashin da aka auna shine lokacin da ƙarfin fitarwa ya tashi daga 10% zuwa 90% na ƙayyadaddun ƙarfin fitarwa na Vout da aka lura akan siginar tashar. |
| 5.0Vdc | ≤75mS |
DC Fitar Ripple & Noise
| Fitar Wutar Lantarki | Ripple & Surutu |
| 5.0 Vdc | 150mVp-p@25℃ |
| 240mVp-p@-25 ℃ |
Hanyoyin Aunawa
Gwajin A. Ripple & Noise: Ripple & bandwidth an saita zuwa 20mHZ.
B.Yi amfani da 0.1uf yumbu capacitor a layi daya tare da 10uf electrolytic capacitor a fitarwa mai haɗa tashoshi don ripple & ma'aunin amo.
Ayyukan Kariya
Fitar Short Circuit Kariya
| Fitar Wutar Lantarki | Sharhi |
| 5.0 Vdc | Za a dakatar da fitarwa lokacin da aka gajarta da'ira kuma a sake farawa aiki bayan kawar da rashin aiki. |
Fitar Sama da Kariya
| Fitar Wutar Lantarki | Sharhi |
| 5.0 Vdc | Fitarwa zai daina aiki lokacin fitarwahalin yanzu ya fi 105 ~ 138% na ƙimar halin yanzu kuma zai sake farawa aiki bayan kawar da rashin aiki. |
Sama da Kariyar Zazzabi
| Fitar Wutar Lantarki | Sharhi |
| 5.0 Vdc | Fitarwa zai daina aiki lokacin da zafin jiki sama da ƙimar da aka saita kuma zai sake farawa aiki bayan kawar da rashin aiki. |
Kaɗaici
Ƙarfin Dielectric
| Shigarwa Zuwa Fitarwa | Gwajin fayil 50Hz 3000Vac AC minti 1, Leakage na yanzu≤5mA |
| Shigarwa zuwa FG | Gwajin fayil 50Hz 1500Vac AC minti 1, Leakage na yanzu≤5mA |
Juriya na Insulation
| Shigarwa Zuwa Fitarwa | DC 500V Matsakaicin juriya na rufi dole ne ya zama ƙasa da 10MΩ (a cikin zafin jiki) |
| Fitowa Zuwa FG | DC 500V Matsakaicin juriya na rufi dole ne ya zama ƙasa da 10MΩ (a cikin zafin jiki) |
| Shigarwa zuwa FG | DC 500V Matsakaicin juriya na rufi dole ne ya zama ƙasa da 10MΩ (a cikin zafin jiki) |
EMC
Bukatun Muhalli
Yanayin Zazzabi
Yanayin Aiki:-25℃～+60℃
Yanayin Ajiya:-40 ℃ ~ + 70 ℃
Danshi
Humidity Aiki:Dangin zafi yana daga 15RH zuwa 90RH.
Humidity Ajiya:Dangin zafi yana daga 10RH zuwa 95RH.
Tsayi
Tsayin Aiki:0 zuwa 3000m
Shock & Vibration
A. Shock: 49m/s2(5G),11ms, sau ɗaya kowane axis X,Y da Z.
B. Jijjiga: 10-55Hz,19.6m/s2(2G),minti 20 kowanne tare da axis X,Y da Z.
Hanyar sanyaya
Halittasanyaya
Takamaiman Tsanaki
A. Ya kamata a dakatar da samfurin a cikin iska ko sanya shi a fuskar karfe lokacin da aka hada shi, kuma a guji sanyawa a fuskar kayan zafi maras amfani kamar, robobi, allo da sauransu.
B. Ya kamata a wuce sararin samaniya tsakanin kowane nau'i na 5cm don kauce wa rinjayar sanyaya wutar lantarki.
Farashin MTBF
MTBF zai kasance aƙalla sa'o'i 50,000 a 25 ℃ a yanayin cikakken lodi.
Haɗin Pin
Naúrar: mm
Table 1: Input 3 fil tasha block (fiti 9.5mm)
| Suna | Aiki |
| L | Layin shigar da AC L |
| N | Layin shigar da AC N |
 | Layin Duniya |
Table 2: Fitarwa 4 fil tasha block (fiti 8.25mm)
A halin yanzu da ake gudanarwa ta hanyar toshe tashar fitarwa bai kamata ya wuce 25A ba, don haka kar a cika gwaji kuma kuyi aiki a wannan yanayin.Ko kuma tashar tashar za ta lalace daga babban zafin jiki.
| Suna | Aiki |
| V+ V+ | Fitarwa DC tabbataccen sanda |
| V-V- | Fitar DC korau sandar |
Girman Hawan Kayan Wuta
Girma
Girman waje:L*W*H=143×60×31mm
Naúrar: mm
Hanyar 1: M3 sukurori kulle a cikin hawa tara na 4 U grooves a karkashin hukuma.
Ya kamata a zaɓi hanya ɗaya daga cikin hanyoyi guda biyu, tabbatar da cewa ɓangaren dunƙule da ke cikin jikin wutar lantarki ya kamata ya zama ƙasa da 3mm kuma ba shi da ƙarfi sosai don kauce wa lalata dunƙule.
Kariyar Amfani
Dole ne samar da wutar lantarki yayi aiki a yanayin rufewa kuma tashar tashar tashar USB dole ne ta shiga cikin jiyya.Bayan haka, tabbatar cewa samfurin yana ƙasa da kyau kuma a hana taɓa ma'aikatun don guje wa ƙonewa hannu.
