G-Makamashi JPS300P 100-240V Input LED Wutar Allon Wuta 5V 60A 300W
Babban Bayanin Samfur
| Ƙarfin fitarwa (W) | Shigar da aka ƙididdigewa Wutar lantarki (Vac) | Fitar da aka ƙididdigewa Voltage (Vdc) | Fitowar Yanzu Rage (A) | Daidaitawa | Ripple da Surutu (mVp-p) |
| 300W | 100-240 | +5.0 | 0-60 | ± 5% | ≤200mVp-p @25℃ |
|
|
|
|
|
| ≤200mVp-p @-25 ℃
|
Yanayin Muhalli
| Abu | Bayani | Tech Spec | Naúrar | Magana |
| 1 | Yanayin aiki | -30-50 | ℃ | Koma amfani da muhalli zafin jiki da kaya lankwasa. |
| 2 | Ajiye zafin jiki | -40-85 | ℃ |
|
| 3 | Dangi zafi | 10-90 | % |
|
| 4 | Hanyar kawar da zafi | Fan sanyaya |
|
|
| 5 | Matsin iska | 80- 106 | Kpa |
Halin Lantarki
| 1 | Halin shigarwa | ||||
| Abu | Bayani | Tech Spec | Naúrar | Magana | |
| 1.1 | Ƙimar ƙarfin lantarki | 200-240 | Vac | Koma zuwa ga zane na shigarwa ƙarfin lantarki da kaya dangantaka. | |
| 1.2 | Kewayon mitar shigarwa | 47-63 | Hz |
| |
| 1.3 | inganci | ≥85.0 | % | Vin = 220Vac 25 ℃ Fitarwa Cikakken Load (a dakin zafin jiki) | |
| 1.4 | Fasali mai inganci | ≥0.40 |
| Vin=220Vac Ƙididdigar wutar lantarki ta shigarwa, fitarwa cikakken kaya | |
| 1.5 | Matsakaicin shigarwa na halin yanzu | ≤3 | A |
| |
| 1.6 | Dash halin yanzu | ≤70 | A | @220Vac Gwajin yanayin sanyi @220Vac | |
| 2 | Halin fitarwa | ||||
| Abu | Bayani | Tech Spec | Naúrar | Magana | |
| 2.1 | Fitar ƙarfin lantarki | +5.0 | Vdc |
| |
| 2.2 | Fitar da kewayon halin yanzu | 0-40.0 | A |
| |
| 2.3 | Wutar lantarki daidaitacce iyaka | 4.2-5.1 | Vdc |
| |
| 2.4 | Fitar wutar lantarki | ±1 | % |
| |
| 2.5 | Tsarin kaya | ±1 | % |
| |
| 2.6 | daidaiton ƙarfin ƙarfin lantarki | ±2 | % |
| |
| 2.7 | Fitowar hayaniya da hayaniya | ≤200 | mVp-p | Ƙididdigar shigarwa, fitarwa cikakken kaya, 20MHz bandwidth, load side da 47 uf/104 capacitor | |
| 2.8 | Fara jinkirin fitarwa | ≤3.0 | S | Vin=220Vac @25℃ gwajin | |
| 2.9 | Lokacin haɓaka ƙarfin wutar lantarki | ≤90 | ms | Vin=220Vac @25℃ gwajin | |
| 2.10 | Canja injin overshoot | ±5 | % | Gwaji yanayi: cikakken kaya, Yanayin CR | |
| 2.11 | Fitowa mai ƙarfi | Canjin wutar lantarki yana ƙasa da ± 10% VO;mai tsauri lokacin amsa bai wuce 250us ba | mV | LOKACI 25% -50% -25% 50% -75% -50% | |
| 3 | Halin kariya | ||||
| Abu | Bayani | Tech Spec | Naúrar | Magana | |
| 3.1 | Shigar da ƙananan ƙarfin lantarki kariya | 135-165 | VAC | Sharuɗɗan gwaji: cikakken kaya | |
| 3.2 | Shigar da ƙananan ƙarfin lantarki wurin dawowa | 140-170 | VAC |
| |
| 3.3 | Ƙayyadaddun fitarwa na yanzu wurin kariya | 46-60 | A | HI-CUP ya karu dawo da kai, gujewa lalacewa na dogon lokaci iko bayan a ikon gajeren lokaci. | |
| 3.4 | Fitar gajeriyar kewayawa kariya | Maida Kai | A | ||
| 3.5 | fiye da zafin jiki kariya | / |
|
| |
| 4 | Wani hali | ||||
| Abu | Bayani | Tech Spec | naúrar | Magana | |
| 4.1 | Farashin MTBF | ≥40,000 | H |
| |
| 4.2 | Leakage Yanzu | 1 (Vin = 230Vac) | mA | Hanyar gwajin GB8898-2001 | |
Halayen Ƙaunar Ƙarfafawa
| Abu | Bayani | Tech Spec | Magana | |
| 1 | Ƙarfin Lantarki | Shigarwa zuwa fitarwa | 3000Vac/10mA/1min | Babu harsashi, babu rugujewa |
| 2 | Ƙarfin Lantarki | Shigarwa zuwa ƙasa | 1500Vac/10mA/1min | Babu harsashi, babu rugujewa |
| 3 | Ƙarfin Lantarki | Fitowa zuwa ƙasa | 500Vac/10mA/1min | Babu harsashi, babu rugujewa |
Dangantakar Bayanai Curve
Dangantaka tsakanin zafin muhalli da kaya
Wutar lantarki na shigarwa da lanƙwan wutar lantarki
Load da ingantaccen lanƙwasa
Halin injiniya da ma'anar masu haɗawa (naúrar: mm)
Girma: tsayi× fadi× tsawo=140×59×30±0.5.
Girman Ramukan Majalisar
A sama akwai kallon sama na harsashi na ƙasa.Ƙayyadaddun ƙayyadaddun ƙuƙwalwar da aka gyara a cikin tsarin abokin ciniki shine M3, jimlar 4. Tsawon tsararren tsararren da ke shiga jikin wutar lantarki bai kamata ya wuce 3.5mm ba.
Hankali Don Aikace-aikace
- Samar da wutar lantarki don zama amintaccen rufi, kowane gefen harsashi na ƙarfe tare da waje ya kamata ya zama nesa mai aminci fiye da 8mm.Idan ƙasa da 8mm yana buƙatar kushin 1mm kauri sama da takardar PVC don ƙarfafa rufin.
- Amintaccen amfani, don gujewa hulɗa da mahaɗar zafi, yana haifar da girgiza wutar lantarki.
- PCB jirgin hawa rami ingarma diamita bai wuce 8mm.
- Bukatar L315mm * W200mm* H3mm aluminum farantin a matsayin karin zafi nutse.
Idan na rasa fayil na RCG na allo, ta yaya zan iya dawo da shi?
A: Kuna iya danna "karanta baya" don dawo da ita a cikin shafin mai karɓar software idan ku ko mai badawa kun ajiye ta a baya.
Yadda ake haɓaka firmware na katunan Novastar?
A: A cikin yanayin ci gaba na NovaLCT, duk inda aka shigar da admin, shafin haɓakawa zai fito.
Menene ƙarfin lodi na tashar LAN aika katin guda ɗaya?
A: Matsakaicin nauyin tashar tashar LAN guda ɗaya 655360 pixels.
Shin ina buƙatar zaɓar tsarin aiki tare ko tsarin asynchronous?
A: Idan kuna buƙatar kunna bidiyon a ainihin lokacin, kamar nunin LED mataki, kuna buƙatar zaɓar tsarin daidaitawa.Idan kuna buƙatar kunna bidiyon AD na ɗan lokaci, kuma ko da ba sauƙin sanya PC kusa da shi ba, kuna buƙatar tsarin asynchronous, kamar allon tallan gaban kanti na LED.
Menene mafi kyawun sabis ɗin ku?
A: Injiniya ɗaya zuwa ɗaya zuwa tsarin alhakin abokin ciniki.Za mu yi:
1. Sanin aikin ku kuma samar da mafi kyawun mafita gare shi;
2. Bibiyar odar ku kuma sanar da ku kowane mataki da cikakken bayani game da shi;
3. Koyar da ku yadda ake shigar da amfani da allon;
4. Kula da amfani na gaba na allon ku kuma tabbatar da cewa sabis ɗin tallace-tallace yana da kyau,
5…6… da sauransu.
Yaya game da Sharuɗɗan Garanti?
A: Kada ku damu, muna da ƙwararrun ƙungiyar bayan-sayar da za ta magance kowace tambaya bayan kun ba da oda.Kuma injiniyan tallace-tallacen ku na musamman zai taimaka muku shawo kan kowace matsala.
Yadda ake isar da kaya na?
A: Ya dogara da kasafin ku da ranar da kuke buƙatar allon jagora.A kai a kai, ana jigilar nunin jagora ta teku, idan adadin ya ragu kuma kuna buƙatar shi cikin gaggawa, za mu iya shirya jigilar iska a gare ku.
Shin wannan na'ura mai sarrafa bidiyo tana goyan bayan tsarin sarrafa Nova?
A: Ee, na'ura mai sarrafa bidiyon mu yanayin duniya ne, yana goyan bayan yawancin tsarin sarrafawa kamar Linsn / Colorlight / Nova / Dbstar da sauransu.
Yadda ake ci gaba da oda don nunin jagora?
A: Na farko: Bari mu san bukatunku ko aikace-aikacenku.
Na biyu: Za mu samar muku da mafi kyawun bayani tare da samfurin da ya dace bisa ga buƙatun ku da shawarar ku.
Na uku: Za mu aiko muku da cikakken zance tare da cikakkun bayanai dalla-dalla don buƙatar ku, kuma za mu aiko muku da ƙarin cikakkun bayanai na samfuranmu.
Na hudu: Bayan karbar ajiya, sai mu shirya samar.
Na biyar: A lokacin samarwa, za mu aika da samfurin gwajin hotuna ga abokan ciniki, bari abokan ciniki su san kowane tsarin samarwa
Na shida: Abokan ciniki suna biyan kuɗin ma'auni bayan tabbatar da samfurin da aka gama.
Na bakwai: Muna shirya jigilar kaya
Me game da lokacin jagora?
A: Samfurin yana buƙatar kwanaki 15, lokacin samar da taro yana buƙatar makonni 3-5 ya dogara da adadi.
Menene lokacin jagoran ku?
A: Lokacin bayarwa shine kwanaki 1-30 wanda ya dogara da dalla-dalla da yawa.
Kuna karban OEM/ODM?
A: iya.
Menene bambanci tsakanin sabis na baya da allon jagoran sabis na gaba?
A: Sabis na baya, wannan yana nufin yana buƙatar isasshen sarari a bayan allon jagora, ta yadda ma'aikaci zai iya yin shigarwa ko kiyayewa.
Sabis na gaba, ma'aikaci na iya yin shigarwa da kiyayewa daga gaba kai tsaye.saukaka sosai, da ajiye sarari.musamman shine allon jagora zai daidaita akan bango.
Zan iya samun odar samfurin don samfuran LED?
A: Ee, muna maraba da samfurin samfurin don gwadawa da duba inganci.
