G-makamashi JPS300V 110V/220V Input LED Nuni Wutar Lantarki
Babban Bayanin Samfur
| Ƙarfin fitarwa (W) | Shigar da aka ƙididdigewa Wutar lantarki (Vac) | Fitar da aka ƙididdigewa Voltage (Vdc) | Fitowar Yanzu Rage (A) | Daidaitawa | Ripple da Surutu (mVp-p) |
| 300 | 110/220 (± 20%) | +5.0 | 0-60.0 | ± 2% | ≤150 |
Yanayin Muhalli
| Abu | Bayani | Tech Spec | Naúrar | Magana |
| 1 | Yanayin aiki | -30-50 | ℃ |
|
| 2 | Ajiye zafin jiki | -40-80 | ℃ |
|
| 3 | Dangi zafi | 10-90 | % | Babu taki |
| 4 | Hanyar kawar da zafi | Fan sanyaya |
| Ya kamata a shigar da wutar lantarki a kan farantin karfe don zubar da zafi |
| 5 | Matsin iska | 80- 106 | Kpa |
|
| 6 | Tsayin matakin teku | 2000 | m |
Halin Lantarki
| 1 | Halin shigarwa | ||||
| Abu | Bayani | Tech Spec | Naúrar | Magana | |
| 1.1 | Ƙimar ƙarfin lantarki | 200-240 | Vac | Koma zuwa ga zane na shigarwa ƙarfin lantarki da kaya dangantaka. | |
| 1.2 | Kewayon mitar shigarwa | 47-63 | Hz |
| |
| 1.3 | inganci | ≥85.0 | % | Vin = 220Vac 25 ℃ Fitarwa Cikakken Load (a dakin zafin jiki) | |
| 1.4 | Fasali mai inganci | ≥0.40 |
| Vin=220Vac Ƙididdigar wutar lantarki ta shigarwa, fitarwa cikakken kaya | |
| 1.5 | Matsakaicin shigarwa na halin yanzu | ≤3 | A |
| |
| 1.6 | Dash halin yanzu | ≤70 | A | @220Vac Gwajin yanayin sanyi @220Vac | |
| 2 | Halin fitarwa | ||||
| Abu | Bayani | Tech Spec | Naúrar | Magana | |
| 2.1 | Fitar ƙarfin lantarki | +5.0 | Vdc |
| |
| 2.2 | Fitar da kewayon halin yanzu | 0-40.0 | A |
| |
| 2.3 | Wutar lantarki daidaitacce iyaka | 4.2-5.1 | Vdc |
| |
| 2.4 | Fitar wutar lantarki | ±1 | % |
| |
| 2.5 | Tsarin kaya | ±1 | % |
| |
| 2.6 | daidaiton ƙarfin ƙarfin lantarki | ±2 | % |
| |
| 2.7 | Fitowar hayaniya da hayaniya | ≤200 | mVp-p | Ƙididdigar shigarwa, fitarwa cikakken kaya, 20MHz bandwidth, load side da 47 uf/104 capacitor | |
| 2.8 | Fara jinkirin fitarwa | ≤3.0 | S | Vin=220Vac @25℃ gwajin | |
| 2.9 | Lokacin haɓaka ƙarfin wutar lantarki | ≤90 | ms | Vin=220Vac @25℃ gwajin | |
| 2.10 | Canja injin overshoot | ±5 | % | Gwaji yanayi: cikakken kaya, Yanayin CR | |
| 2.11 | Fitowa mai ƙarfi | Canjin wutar lantarki yana ƙasa da ± 10% VO;mai tsauri lokacin amsa bai wuce 250us ba | mV | LOKACI 25% -50% -25% 50% -75% -50% | |
| 3 | Halin kariya | ||||
| Abu | Bayani | Tech Spec | Naúrar | Magana | |
| 3.1 | Shigar da ƙananan ƙarfin lantarki kariya | 135-165 | VAC | Sharuɗɗan gwaji: cikakken kaya | |
| 3.2 | Shigar da ƙananan ƙarfin lantarki wurin dawowa | 140-170 | VAC |
| |
| 3.3 | Ƙayyadaddun fitarwa na yanzu wurin kariya | 46-60 | A | HI-CUP ya karu dawo da kai, gujewa lalacewa na dogon lokaci iko bayan a ikon gajeren lokaci. | |
| 3.4 | Fitar gajeriyar kewayawa kariya | Maida Kai | A | ||
| 3.5 | fiye da zafin jiki kariya | / |
|
| |
| 4 | Wani hali | ||||
| Abu | Bayani | Tech Spec | naúrar | Magana | |
| 4.1 | Farashin MTBF | ≥40,000 | H |
| |
| 4.2 | Leakage Yanzu | 1 (Vin = 230Vac) | mA | Hanyar gwajin GB8898-2001 | |
Halayen Ƙaunar Ƙarfafawa
| Abu | Bayani | Tech Spec | Magana | |
| 1 | Ƙarfin Lantarki | Shigarwa zuwa fitarwa | 3000Vac/10mA/1min | Babu harsashi, babu rugujewa |
| 2 | Ƙarfin Lantarki | Shigarwa zuwa ƙasa | 1500Vac/10mA/1min | Babu harsashi, babu rugujewa |
| 3 | Ƙarfin Lantarki | Fitowa zuwa ƙasa | 500Vac/10mA/1min | Babu harsashi, babu rugujewa |
Dangantakar Bayanai Curve
Dangantaka tsakanin zafin muhalli da kaya
Wutar lantarki na shigarwa da lanƙwan wutar lantarki
Load da ingantaccen lanƙwasa
Halin injiniya da ma'anar masu haɗawa (naúrar: mm)
Girma: tsayi× fadi× tsawo=140×59×30±0.5.
Girman Ramukan Majalisar
A sama akwai kallon sama na harsashi na ƙasa.Ƙayyadaddun ƙayyadaddun ƙuƙwalwar da aka gyara a cikin tsarin abokin ciniki shine M3, jimlar 4. Tsawon tsararren tsararren da ke shiga jikin wutar lantarki bai kamata ya wuce 3.5mm ba.
Hankali Don Aikace-aikace
Samar da wutar lantarki don zama amintaccen rufi, kowane gefen harsashi na ƙarfe tare da waje ya kamata ya zama nesa mai aminci fiye da 8mm.Idan ƙasa da 8mm yana buƙatar kushin 1mm kauri sama da takardar PVC don ƙarfafa rufin.
Amintaccen amfani, don gujewa hulɗa da mahaɗar zafi, yana haifar da girgiza wutar lantarki.
PCB jirgin hawa rami ingarma diamita bai wuce 8mm.
Bukatar L355mm * W240mm * H3mm aluminum farantin a matsayin karin zafi nutse..
Yadda ake canza hasken nunin LED ta atomatik a lokaci daban-daban?
A: Ana buƙatar shi tare da firikwensin haske.Wasu na'urori na iya haɗawa da firikwensin kai tsaye.Wasu na'urori suna buƙatar ƙara katin mai aiki da yawa sannan su iya shigar da firikwensin haske.
Yadda ake siffanta splicer na bidiyo, kamar Novastar H2?
A: Da farko yanke shawarar adadin tashoshin LAN da allon ke buƙata, sannan zaɓi katin aikawa da tashar jiragen ruwa 16 ko tashar jiragen ruwa 20 da adadin, sannan zaɓi siginar shigarwa wanda kuke son amfani da shi.H2 na iya shigar da matsakaicin allon shigarwa 4 da allon katin aika 2.Idan na'urar H2 bata isa ba, zata iya amfani da H5, H9 ko H15 don shigar da ƙarin allunan shigarwa ko fitarwa.
Ta yaya zan gane abin da farar LED nuni ya kamata in saya?
A: A al'ada dangane da nisa kallo.Idan nisan kallo shine mita 2.5 a cikin dakin taro, to P2.5 shine mafi kyau.Idan nisan kallo shine mita 10 a waje, to P10 shine mafi kyau.
Menene mafi kyawun al'amari rabo ga LED allo?
A: Mafi kyawun ra'ayi shine 16: 9 ko 4: 3
Kuna gwada duk kayan ku kafin bayarwa?
A: Ee, muna da 100% gwaji don 72hrs kafin bayarwa.
Ta yaya kuke sanya kasuwancin mu na dogon lokaci da kyakkyawar dangantaka?
Muna kiyaye inganci mai kyau da farashin gasa don tabbatar da amfanin abokan cinikinmu;
Menene kula da ingancin samfuran ku?
Quality shine manufarmu ta farko.Muna ba da hankali sosai ga farkon da ƙarshen samarwa.Kayayyakinmu sun wuce CE & RoHs & ISO & FCC takaddun shaida.
Menene sabis na bayan-tallace-tallace ku?
A: Za mu iya ba da garantin 100% don samfuranmu.Idan kuna da wasu tambayoyi, zaku sami amsarmu cikin awanni 24.
