G-Energy N200V5-B Slim LED Bidiyo bangon 5V Module Power wadata
Gabatarwa
Ƙarfin wutar lantarki yana da halaye na ƙananan ƙararrawa, babban inganci, aikin barga da babban aminci.Wutar lantarki tana da shigarwar da ba ta da ƙarfin lantarki, iyakancewar fitarwa, gajeriyar kewayawa da sauransu.Da'irar daidaitawa ta aiki tare tana inganta ingantaccen ƙarfin wutar lantarki kuma tana adana yawan kuzari.
Babban Bayanin Samfur
| Ƙarfin fitarwa (W) | Shigar da aka ƙididdigewaWutar lantarki (Vac) | Fitar da aka ƙididdigewaWutar lantarki (Vdc) | Fitowar YanzuRage (A) | Daidaitawa | Ripple daSurutu (mVp-p) |
| 300 | 180-264 | +5.0 | 0-40.0 | ± 2% | ≤150 |
Yanayin muhalli
| Abu | Bayani | Tech Spec | Naúrar | Magana |
| 1 | Yanayin aiki | -30-50 | ℃ |
|
| 2 | Ajiye zafin jiki | -40-80 | ℃ |
|
| 3 | Dangi zafi | 10-90 | % | Babu taki |
| 4 | Hanyar kawar da zafi | Yanayin sanyaya |
| Ya kamata a shigar da wutar lantarki a kan farantin karfe don zubar da zafi |
| 5 | Matsin iska | 80- 106 | Kpa |
|
| 6 | Tsayin matakin teku | 2000 | m |
Halin lantarki
| 1 | Shigarwa hali | |||
| Abu | Bayani | Tech Spec | Naúrar | Magana |
| 1.1 | Ƙimar ƙarfin lantarki | 200-240 | Vac | Koma zuwa gazane na shigarwa ƙarfin lantarki da kayadangantaka. |
| 1.2 | Kewayon mitar shigarwa | 47-63 | Hz |
|
| 1.3 | inganci | ≥85.0 | % | Vin = 220Vac 25 ℃ Fitar da Cikakkun Load (a yanayin zafin ɗaki) |
| 1.4 | Fasali mai inganci | ≥0.45 |
| Vin=220Vac Ƙididdigar wutar lantarki ta shigarwa, fitarwa cikakken kaya |
| 1.5 | Matsakaicin shigarwa na halin yanzu | ≤2.5 | A |
|
| 1.6 | Dash halin yanzu | ≤120 | A | @220Vac Gwajin yanayin sanyi @220Vac |
| 2 | Halin fitarwa | |||
| Abu | Bayani | Tech Spec | Naúrar | Magana |
| 2.1 | Fitar ƙarfin lantarki | +5.0 | Vdc | |
| 2.2 | Fitar da kewayon halin yanzu | 0-40.0 | A | |
| 2.3 | Wutar lantarki daidaitacceiyaka | / | Vdc | Rashin daidaitawaƙarfin lantarki |
| 2.4 | Fitar wutar lantarki | ±2 | % | |
| 2.5 | Tsarin kaya | ±2 | % | |
| 2.6 | daidaiton ƙarfin ƙarfin lantarki | ±2 | % | |
| 2.7 | Fitowar hayaniya da hayaniya | ≤150 | mVp-p | Ƙididdigar shigarwa, fitarwacikakken kaya, 20 MHzbandwidth, lodin gefeda 47 uf/104 capacitor |
| 2.8 | Fara jinkirin fitarwa | ≤5.0 | S | Vin=220Vac @25℃ gwajin |
| 2.9 | Lokacin haɓaka ƙarfin wutar lantarki | ≤50 | ms | Vin=220Vac @25℃ gwajin |
| 2.10 | Canja injin overshoot | ±5 | % | Gwajiyanayi: cikakken kaya,Yanayin CR |
| 2.11 | Fitowa mai ƙarfi | Canjin wutar lantarki bai kai ba ± 10% VO;mai tsauriamsa lokaci bai kai ba250 mu | mV | LOKACI 25% -50% -25% 50% -75% -50% |
| 3 | Halin kariya | |||
| Abu | Bayani | Tech Spec | Naúrar | Magana |
| 3.1 | Shigar da ƙananan ƙarfin lantarkikariya | 140-175 | VAC | Sharuɗɗan gwaji: cikakken kaya |
| 3.2 | Shigar da ƙananan ƙarfin lantarkiwurin dawowa | 160-180 | VAC | |
| 3.3 | Ƙayyadaddun fitarwa na yanzu wurin kariya | 46-60 | A | HI-CUP ya karu dawo da kai, gujewa lalacewa na dogon lokaci iko bayan a ikon gajeren lokaci. |
| 3.4 | Fitar gajeriyar kewayawakariya | Maida Kai | A | |
| 4 | Wani hali | |||
| Abu | Desctsagewa | Fasaha Spec | naúrar | Ralamar |
| 4.1 | Farashin MTBF | ≥40,000 | H |
|
| 4.2 | Leakage Yanzu | 3.0 (Vin = 230Vac) | mA | GB8898-2001 hanyar gwaji |
Halayen Ƙarfafa Ƙarfafawa
| Abu | Bayani | Tech Spec | Magana | |
| 1 | Ƙarfin Lantarki | Shigarwa zuwa fitarwa | 3000Vac/10mA/1min | Babu harsashi, babu rugujewa |
| 2 | Ƙarfin Lantarki | Shigarwa zuwa ƙasa | 1500Vac/10mA/1min | Babu harsashi, babu rugujewa |
| 3 | Ƙarfin Lantarki | Fitowa zuwa ƙasa | 500Vac/10mA/1min | Babu harsashi, babu rugujewa |
Dangantakar Bayanai Curve
Dangantaka tsakanin zafin muhalli da kaya
Wutar lantarki na shigarwa da lanƙwan wutar lantarki
Load da ingantaccen lanƙwasa
Halin injiniya da ma'anar masu haɗawa (naúrar: mm)
-
- Girma:tsayi×fadi×tsawo=190×82×30±0.5.mm
- Girman Ramukan Majalisar
A sama akwai kallon sama na harsashi na ƙasa.Ƙayyadaddun ƙayyadaddun ƙuƙwalwar da aka gyara a cikin tsarin abokin ciniki shine M3, jimlar 4. Tsawon tsararren tsararren da ke shiga jikin wutar lantarki bai kamata ya wuce 3.5mm ba.
Hankali Don Aikace-aikace
- Samar da wutar lantarki don zama amintaccen rufi, kowane gefen harsashi na ƙarfe tare da waje ya kamata ya zama nesa mai aminci fiye da 8mm.Idan ƙasa da 8mm yana buƙatar kushin 1mm kauri sama da takardar PVC don ƙarfafa rufin.
- Amintaccen amfani, don gujewa hulɗa da mahaɗar zafi, yana haifar da girgiza wutar lantarki.
- PCB jirgin hawa rami ingarma diamita bai wuce 8mm.
- Bukatar L355mm*W240mm*H3mm aluminum farantin a matsayin karin zafi nutse.
Yadda za a yi tsirara-ido 3D LED nuni?
A: Bukatar ƙaramin nuni na LED, mafi kyau tare da babban wartsakewa, saitin sarrafa bidiyo pixel ta pixel, da kunna bidiyo mai inganci na 3D.
Bayan na canza ɗaya daga cikin katunan karɓa, ba ya aiki.Ta yaya zan iya magance shi?
A: Da fatan za a duba firmware.Idan wannan sabon katin ya bambanta da sauran katin, zaku iya haɓaka shi zuwa firmware iri ɗaya, sannan zai yi aiki.
Idan na rasa fayil na RCG na allo, ta yaya zan iya dawo da shi?
A: Kuna iya danna "karanta baya" don dawo da ita a cikin shafin mai karɓar software idan ku ko mai badawa kun ajiye ta a baya.
Yadda ake haɓaka firmware na katunan Novastar?
A: A cikin yanayin ci gaba na NovaLCT, duk inda aka shigar da admin, shafin haɓakawa zai fito.
Yadda ake haɓaka firmware na masu sarrafa Linsn?
A: A cikin saitin saitin mai karɓar LED, duk inda aka shigar da cfxoki, sannan shafin haɓakawa zai fito ta atomatik.
Yadda ake sabunta firmware na tsarin Colorlight?
A: Bukatar sauke software na LEDUpgrade
Yadda ake canza hasken nunin LED ta atomatik a lokaci daban-daban?
A: Ana buƙatar shi tare da firikwensin haske.Wasu na'urori na iya haɗawa da firikwensin kai tsaye.Wasu na'urori suna buƙatar ƙara katin mai aiki da yawa sannan su iya shigar da firikwensin haske.
Yadda ake siffanta splicer na bidiyo, kamar Novastar H2?
A: Da farko yanke shawarar adadin tashoshin LAN da allon ke buƙata, sannan zaɓi katin aikawa da tashar jiragen ruwa 16 ko tashar jiragen ruwa 20 da adadin, sannan zaɓi siginar shigarwa wanda kuke son amfani da shi.H2 na iya shigar da matsakaicin allon shigarwa 4 da allon katin aika 2.Idan na'urar H2 bata isa ba, zata iya amfani da H5, H9 ko H15 don shigar da ƙarin allunan shigarwa ko fitarwa.
